The PQ219 probe holder and PCB holder kit is ideal for making hands-free measurements, for PCB inspection, or even as a soldering station! The kit is a valuable accessory for your 8-channel PicoScope 6824E or 6804E oscilloscope, ideal if you already have the scope and the four P2056 probes supplied. Included in the kit:

• An A4-sized (about 11" x 9") steel base plate
• 4 x PCB holders
• 8 x probe holders
• 8 x pairs of colored elastic cable ties
• 4 x P2056 probes (to add to the four probes already included in the 8-channel PicoScope 6000E product pack)

The base plate provides a secure footing for your probe positioning system. It's mirror-finished, allowing you to see the underside of the PCB to view any status LEDs during test.

Your PCB is fixed into place with four powerful magnetic posts employing spring-loaded clamps to grip the PCB under test. The clamps use a pair of replaceable insulating washers to avoid shorting tracks on the PCB.

With strong magnets at their base, the eight gooseneck probe holders offer a flexible way to position the probe tip while holding it firmly poised in place. Their unique design employs a precisely weighted probe holder that pushes the sprung probe tip just enough to make a good contact on your PCB or unit under test. The kit includes 8 pairs of silicone cable ties in the PicoScope channel colors. These stretchy rubber ties allow the probe cable to be secured to the probe holder gooseneck, adding stability and also a neat way of identifying which probes are connected to which channels (especially useful with an eight-channel oscilloscope!)

 User's Guide