The CS1031 Differential probe is a switchable x100, x200, x500 and x1000 50 MHz differential probe for making isolated measurements between any two points in a system.
Specifications
| Item | Position x 100 | Position x 200 | Position x 500 | Position x 1000 |
| Attenuation - 1MΩ | 100:1 | 200:1 | 500:1 | 1000:1 |
| Attenuation - 50Ω | 200:1 | 400:1 | 1000:1 | 2000:1 |
| Bandwidth | DC to 25 MHz | DC to 50 MHz | DC to 50 MHz | DC to 50 MHz |
| Input Impedance | 4 MΩ 1.2 pF between inputs | |||
| 2 MΩ 2.3 pF between inputs and ground | ||||
| Max Op Voltage | ±650V (DC +peak AC) | ±1300V (DC +peak AC) | ±3250V (DC +peak AC) | ±6500V (DC +peak AC) |
| Max V to Ground | 6500 V (DC +peak AC). | |||
| Output Impedance | 50Ω | |||
| Noise | <2 mV rms into 50Ω load | |||
| CMRR | 50/60Hz: | >10,000:1 | ||
| 100Hz: | >1,000:1 | |||
| 1MHz: | >300:1 | |||
| Safety | Meets IEC1010 Cat 1. EN61010, UL3111 | |||
| Power | One internal 9V PP3 battery or external 6-9V DC. | |||
| Size | 200 x 55 x 30 mm (plastic case) | |||
| Weight | 245 gm (plastic case) | |||
| Cable Length | 1 m | |||
Accessories that are included with the differential probe are:Carry Bag, Instruction Manual, Large Crocodile Clips, Long Grabber Clips, Test leads, BNC-BNC cable, Power supply
