Home Page
Home|Sitemap|Contact
Singapore - 
	DT TECHSOLUTIONS PTE LTD   India - DT TECHSOLUTIONS PVT LTD
Home Page
Your Cart
Your shopping cart is empty!

Currency
American Dollar

P2103A Differential TDR Probe

Printer Friendly Tell a Friend
P2103A Differential TDR Probe
Price: 

Model:
Qty:

Highlights:
  • Compatible with all 50 ohm Instruments; 100 Ohm nominal differential impedance
  • Fixed pitches available: 50 and 100 mils
  • Spring pins for easy landing

  Description  

P2103A Differential TDR Probe

Product Details

The Picotest P2103A probe is a 100 ohm input impedance differential transmission line ‘browser’ probe for TDR/TDT applications. This precision probe supports a variety of measurements.

To characterize a differential pair, the TDR must drive a differential signal and measure the response as the reflected differential signal. This requires two channels to be connected to the same end of the differential pair, and have the equivalent of two, simultaneous stimulus – either launching a differential signal or launching a common signal into the device under test (DUT). This is done with a differential TDR.

Key Features

  • 6GHz Bandwidth (uncorrected)
  • Works for all Time Domain Reflectometry (TDR/TDT) applications
  • Compatible with the Picotest J2154A PerfectPulse® Differential TDR (Differential mode only)
  • Compatible with all 50 ohm Instruments; 100 Ohm nominal differential impedance
  • Fixed pitches available: 50 and 100 mils
  • Spring pins for easy landing
  • Short pins and integrated PDN Cable® for low coupling and optimum shielding
  • Handheld browser style for repeatable and easy probing; Handle design fits most probe holders
  • Slim low-profile housing for comfort and visibility

Applications *

  • Differential transmission lines measurement
  • PCB coupon tester including characteristic impedance including Even/Odd mode impedance
  • Calculation of cable and PCB trace length, dielectric constant, and loss tangent
  • Locate and detect impedance mismatches
  • Failure analysis of PCB with or without components mounted
  • Package impedance testing
  • Measuring each of the five impedances associated with a differential pair
  • Measuring the degree of coupling between lines in a differential pair
  • Measuring the differential impedance of a twisted pair cable
  • Measuring the reflected noise of a differential signal crossing a gap
  • Measuring the mode conversion in a differential pair
  • Identifying specific physical features that contribute to mode conversion in a differential pair
* When coupled with the J2154A TDR, only differential mode applications are supported.

What’s included

  • P2103A Differential TDR Probe with 50 and 100 mil pitch tips
  • Two (2) 0.5m SMA-Mini SMP PDN Cables®
  • TDR Diff Pair Demo Board
  • 1 Year Warranty

 Data Sheet

© 2013 DT TECHSOLUTIONS PTE LTD