The MC MultiGigabit from Technica Engineering establishes a direct point-to-point conversion between Automotive ECUs using any of 2.5/5/10GBASE-T1 multigigabit standards and a SFP+ module compatible with any multigigabit ethernet interface. In the conversion, no packets are stored or modified, the conversion takes place on the physical layer with the highest proven reliability.

This device uses the 88Q4364 2.5G/5G/10GBASE-T1 IEEE 802.3ch compliant Automotive Ethernet PHY, is one of the first implementations of a Multi-Gigabit Automotive Ethernet physical layer media converter. We ensure a trustworthy and effective tool to our customers that are looking for a cost-efficient, quick, and manageable solution for their testing requirements, with no latency and no packet loss.

The MC Multigigabit features bi-directional conversion between automotive multigigabit Ethernet standards (2.5/5/10GBASE-T1) to any other ethernet standard through the SFP+ module and the rate matching feature enables possibility to interface between different line speeds. No customized driver is needed to interact with this MediaConverter.

A convenient housing made of galvanized sheet steel, coupled with DIP switches for ease of configuration, enables the user to interact with the converter effortlessly. Its design makes it portable and easy to install in test racks. The metal housing makes it robust with IP20 protection. The devices can also be accessed using the USB connector to read PHY register values as well as information regarding link quality and SQI. With the in-built status LEDs, the operation of the device is transparent and aids the tester to detect link-up and data transmission visually.

Thus, the MC Multigigabit is the ideal solution for working quickly and efficiently with the new 2.5/5/10GBASE-T1 technology without the burden of extra-wiring, customized connectors, and vendor-specific tools.

Facts

• 4 × DIP switches for easy configuration
• 4 × Status LEDs
• 1 × Standard SFP+ port compatible with any standard SFP+ module
• 1 × H-MTD port for 2.5/5/10GBASE-T1 Automotive Ethernet
• 1 × MQS connector
• Cableset:
  • Tyco MQS socket
  • 1 × Automotive H-MTD connector
  • Cableset (Power, 10GBASE-T1)
  • Additional optical components
• Voltage requirement: 12 to 24 volt DC
• Temperature Range: -40°C to + 85°C (using direct attach cables)
• Stainless steel housing
• Size: 95 × 95 × 32mm

Features

• Allows easy connectivity to ECUs with 2.5/5/10GBASE-T1 multigigabit automotive ethernet ports
• Supports line speed rate matching to be able to adapt to different bandwidths between the 2.5/5/10GBASE-T1 interface T1 line speed and the one negotiated on SFP+ module side.
• Supports different SFP+ modules (10GBASE-T, Optical, Direct attach Cables) to adapt to any customer use case
• Allows to perform EMC tests thanks to supporting optical SFP+ modules
• I/O signals to easily interface to automated systems

Use Case