Industrial Modems
Patch Cables
LLC200A Patch Cables
The low loss patch cables are typically used for machine to machine interconnections where maintaining signal strength is important.
LLC200A Cable – Electrical Specification
| Nominal Impedance | 50 Ohm | ||||||
| Nominal Capacitance | 80pf/m | ||||||
| Nom. Velocity of Propagation | 83% | ||||||
| Shielding Effectiveness | >89dB | ||||||
| Installation & Operating Temp Range | -40 to 85°C | ||||||
| Attenuation dB/100m | 30MHz | 150MHz | 450MHz | 900MHz | 1.8GHz | 2GHz | 5.8GHz |
| 5.8dB | 13.1dB | 22.8dB | 32.6dB | 46.6dB | 49.3dB | 86.5dB | |
LLC200A Cable – Mechanical Properties
| Inner Conductor | 1.12mm | ||||||
| Dielectric | 2.95mm | ||||||
| Primary Shield | Bonded Aluminium Foil 3.07mm | ||||||
| Secondary Shield | 90% Coverage Tinned Wire Braid 3.66mm | ||||||
| Cable Jacket | 4.95mm | ||||||
Standard Parts
SLL200 Low Loss LSZH (RG58 type) Coax Assemblies
SMA Male to SMA Female Part Numbers:
|
SMA Male to TNC Male Part Numbers:
|
SMA Male to N-Type Male Part Numbers:
|
SMA Male to SMA Male RP Part Numbers:
|
